How to reverse door for Hoshizaki AM-50BAJ(AD)

If you would like to reverse the door swing, follow the steps below. 1) While maintaining a hold on the door, remove the hinge stop pin from hinge (B). Pull out the bottom of the door slightly and gently remove the door from hinge (A). See Fig. 1. 2) Remove the 2 screws securing the top panel, then lift it off. See Fig. 2. 3) Remove hinge (A) and the bracket from the right side of the unit and the top brace from the left side. Rotate hinge (A) to position the gasket notch to the inside, then fasten hinge (A) and the bracket to the left side and the top brace to the right side. See Fig. 3 4) Remove hinge (B) from the right side of the unit and the 2 filler screws from the left side. Attach the 2 filler screws to the right side and attach hinge (B) to the left side. See Fig. 4. 5) Rotate the top panel 180° from its previous position. This brings the notch that was previously in the right rear to the left front. See Fig. 5. Hook the rear part of the panel on the body, then secure the front with the 2 screws removed in step 2. 6) Remove the 2 screws attaching the door handle and also remove the other 2 screws indicated in the illustration. Use 2 of the screws to attach the handle to the other side of the door and attach the other 2 screws in the remaining 2 holes. See Fig. 6. 7) Attach the door to hinge (A), then continue to maintain a hold on the door. Screw the hinge stop pin into hinge (B) until it is tight. See Fig. 7

Skip to the end of the images gallery

Skip to the beginning of the images gallery

HOSHIZAKI AM-50BAJ, Top Hat Cuber Ice maker, Air-cooled, Built in Storage Bin

Rating:

98% of 100

3 Reviews Add Your Review

$2,380.00

Expected availability in 2-4 weeks

SKU

AM-50BAJ

The AM-50BAJ is capable of producing approximately 51 lbs of Top Hat style ice cubes per day, and the built-in storage bin will hold up to 22 lbs of ice at a time.

The AM-50BAJ is capable of producing approximately 55 lbs of Top Hat style ice cubes per day, and the built-in storage bin will hold up to 22 lbs of ice at a time. The Air-cooled design also features a Front in, front out airflow system that eliminates the need for side and rear clearance. Perfect for fitting into tight spaces. Drain pump not included.

Features & Specifications:

• NEW stainless steel full length door handle
• Shipping weight: 115 lbs
• Dimensions: 14-7/8” W x 22-5/8” D x 33-1/2” H
• Up to 55 lbs of ice produced per 24 hours
• Up to 22 lbs of built-in storage capacity
• Slim, 14- 7/8 “W wide profile
• Air-cooled, Self Contained, Built in Storage Bin
• Produces top hat ice cubes
• Undercounter design is less than 34” Tall
• Front in, front out airflow
• UL approved for outdoor use
• Easily disassembled water circuit for easy cleaning
• R-134a refrigerant
• Accessory – HS-5061 drain pump assembly
• Ambient temperature range: 45 – 100°F
• Water temperature range: 45 – 95°F
• Water pressure: 7 – 113psig
• Voltage range: 104 – 127V
• 3.4 amps (15 Amp Max fuse)
• 9.9 kwh/100 [email protected] 90/70
• Single phase, 115v/60/1 (4 Wire Configuration)
• Clean ice and easy maintenance lead to longer unit life span
• Two Years: Parts & Labor on entire machine.
• One Year: Parts & Labor on optional HS-5061 Drain Pump Assembly.