Quick answer: A Hoshizaki ice machine should be installed from the instructions for its exact model—not from a generic clearance, voltage, water-pressure, or drain rule. Before delivery, confirm the model number, matching bin or dispenser, electrical service, water connections, drains, condenser type, service access, and the current Hoshizaki instruction manual. Installation and service should be performed by qualified technicians and comply with applicable codes.

Hoshizaki installation checklist at a glance

• Download the instruction manual for the exact model and revision.
• Confirm that the machine, bin or dispenser, adapter, remote condenser, and line set are compatible.
• Measure the complete installed height, width, depth, door swing, ventilation space, and service access.
• Match the nameplate voltage, phase, frequency, minimum circuit requirements, connection method, and grounding instructions.
• Verify potable-water

A remote-condensed Hoshizaki ice machine moves condenser heat and much of the associated sound away from the ice-making location. An integral-condenser model rejects heat at the machine through air or condenser water, depending on the exact model. Condenser location is a separate decision from whether the ice maker is modular or includes built-in storage.

Quick answer: Choose remote condensing when relocating heat and sound justifies the additional condenser, refrigerant-line, electrical, roof or exterior-location, and service requirements. Choose an integral condenser when the simpler installation fits the room's ventilation, heat, sound, water, drainage, and utility limits.

• Remote-condensed: Uses a separately installed compatible condenser. Follow the exact Hoshizaki equipment pairing, line-set limits, electrical requirements, clearances, and installation instructions.
• Integral air-cooled: Rejects heat